產品列表
PROUCTS LIST
相關新聞
NEWS
- 水晶眼膜機優點分析:準確護理與溫和體驗
- 全自動膠囊填充機是實現膠囊灌裝中的核心設備
- 全自動麵膜機:護膚設備如何實現準確的精華液調配?
- 泡罩包裝機:藥品與物品的透明“小房子”
- 中藥超微粉碎機兼具高效性,安全性和廣泛適用性
廣州全不鏽鋼低溫除塵粉碎機
更新時間:2017-03-22
產品型號:FS250-4Q
產品特點:廣州全不鏽鋼低溫除塵粉碎機本機結構簡潔,堅固,運轉平穩,粉碎物料快速,均匀,效果良好。本機全為不鏽鋼材料製作,機殼內部(粉碎槽)所有齒槽經精密機加工從而達到表麵平滑,易於清理,改進了普通粉碎機內壁粗糙,易積粉,難清理的現象,使食品,藥 品,化工等生產更能符合國家標準,達到GMP的衛生要求。
FS250-4Q廣州全不鏽鋼低溫除塵粉碎機的詳細資料:
This aircraft structure simple, strong, smooth, crush the material quickly and evenly, with good results. This machine is all stainless steel, casing (crush Groove) all alveolar precision machining so as to achieve a smooth surface, easy to clean, change within the General mill coarseness, easy to accumulate powder, hard to clean, so that food, medicine, and chemical production more in line with national standards, meet the GMP requirements.
廣州全不鏽鋼低溫除塵粉碎機本機結構簡潔,堅固,運轉平穩,粉碎物料快速,均匀,效果良好。本機全為不鏽鋼材料製作,機殼內部(粉碎槽)所有齒槽經精密機加工從而達到表麵平滑,易於清理,改進了普通粉碎機內壁粗糙,易積粉,難清理的現象,使食品,藥 品,化工等生產更能符合國家標準,達到GMP的衛生要求。
聶
Water dust removal universal mill operating principle:
水冷除塵粉碎機工作原理:
Principles of native smashing hammer high-speed Smash in return. Crushed can be directly discharged from the grinding Chamber, outlet, and generic material after crushing to cotton bags collected, crushed material collected in the bag, the air from the bag out of the small hole of, fines will not be discharged, so as to not waste and pollution effects. Grain size determined by the replacement of different mesh sieve. The machine is equipped with screens, screens can be replaced according to customer requirements, when it was less than the hole diameter material is crushed, powder out of the sieve, fall into the bottom of the aggregate bins, dust flying in the barrel by dusting motor was drawn into the dust box dust bag filter, air discharge through blower outside.
廣州全不鏽鋼低溫除塵粉碎機本機粉碎原理錘式回風高速粉碎。粉碎物可直接從磨腔中排出,經出料口出來,一般的物料經過粉碎後要經過棉布袋來收集,粉碎後的物料收集在袋內,空氣則從布袋的細小孔眼出來,不會將細粉排出,從而起到不浪費,不汙染的效果。粒度大小由更換不同目數的篩網決定。本機配備篩網,篩網可以根據客戶要求進行更換,當物料被粉碎到小於篩孔直徑時,粉劑從篩網中出來,落入下方的集料桶內,在桶內飄揚的粉塵則通過除塵電機的作用被吸入到除塵箱內的除塵袋中過濾,空氣由風機排出室外。
技術參數:
型 號 Model | FS180-4Q | FS250-4Q |
材 質 Material | 304S.S | 304S.S |
產 量 Output(kg/h) | 10-120 | 30-200 |
主軸轉速 Speed(r/min) | 4200 | 4200 |
細 度 Fineness(mesh) | 10-120 | 10-120 |
功 率 Power(kw) | 2.2+0.37 | 5.5+1.1 |
外形尺寸 Dimension(mm) | 1150×770×1200 | 1200×1200×1650 |
集粉箱尺寸 Size of powder box(mm) | 380×380×1200 | 500×500×1500 |
盛料桶尺寸 Size of bucket(mm) | 400×400 | 500×500 |
重 量 Weight(kg) | 260 | 300 |
備注:電機11KW以上的配套不鏽鋼電控箱及叉三角降壓啟動 | ||
Features:
特點 ︰
1, stainless steel grinder is widely used in pharmaceutical, chemical, food and other materials grinding purposes.
1,不鏽鋼粉碎機廣泛應用於製藥, 化工, 食品, 其他物料的粉碎。
2, simple structure, easy grinding chamber assembly and disassembly and cleaning.
2,結構簡單,容易裝配,拆卸和清洗。
3, the machine made of stainless steel, in line with "GMP" requirements.
3,這台機器由不鏽鋼製成,符合"GMP"要求。
4, smooth operation and high efficiency.
4,機械操作簡單,效率高。
5, replacing the screen to adjust the particle size.
5,可以更換篩網調整成品的大小。
How it works:
是如何工作的 ︰
This machine use activities chainring and a fixed tooth plate relative motion, so that the material to be crushed by the teeth impact, friction materials and their impact, and get crushed
本機利用活動齒盤和固定的齒盤的相對運動,這樣的材料被壓齒衝擊, 摩擦材料和它們的影響,並得到壓碎
Universal mill feed material from the hopper crushing chamber, the impact of the blade and the knife holder, knife and fixed knife while rotating shear pulverization, due to the rotation of the centrifugal force, the material automatically from the outlet port.
物料從料鬥進入破碎腔,刀片和刀架, 和固定的刀,然後經過旋轉剪切粉碎,由於旋轉離心力的作用,從而達到粉碎的作用影響。
Note: Due to material differences, so the yield quite different.
注 ︰ 由於材料的差異,所以產量相當不同。





| 如果你對FS250-4Q廣州全不鏽鋼低溫除塵粉碎機感興趣,想了解更詳細的產品信息,填寫下表直接與廠家聯係: |




